Hi Folks,
A friend of mine recently approached me because he has been having problems with Fast DV.now which he is using with Pinnacle Studio. He can capture and edit but so far has never been able to output back to his cam. I suggested that if the DV.now card is OHCI compliant then he should be able to load the std MS drivers, 1394bus.sys and MSDV.sys and that should work with Pinnacle Studio.
However, he gets the same problem, capture and edit OK, but output to cam is a no no!
What actually happens is that the camcorder starts (so control is working), the cam goes into "record mode" but no data is sent to it so only a blank screen is recorded???
So. Is this card OHCI compliant?
Is anybody using one with standard MS drivers?
Has anybody got one working with Pinnacle Studio??
Any suggestions or help would be appreciated.
Regards.
quote:Originally posted by Ford Prefect:
Hi Folks,
A friend of mine recently approached me because he has been having problems with Fast DV.now which he is using with Pinnacle Studio. He can capture and edit but so far has never been able to output back to his cam. I suggested that if the DV.now card is OHCI compliant then he should be able to load the std MS drivers, 1394bus.sys and MSDV.sys and that should work with Pinnacle Studio.
However, he gets the same problem, capture and edit OK, but output to cam is a no no!
What actually happens is that the camcorder starts (so control is working), the cam goes into "record mode" but no data is sent to it so only a blank screen is recorded???
So. Is this card OHCI compliant?
Is anybody using one with standard MS drivers?
Has anybody got one working with Pinnacle Studio??
Any suggestions or help would be appreciated.
Regards.
You have to install the driver from fast. First install Adobe Premiere and delete the OHCI driver then install Fast Forward end after restart it will install the right drivers for the card.
Have you already checked the cable and settings in the Codec driver in the Pinnacle software. What you can also try is to put it back on tape via Adobe Premiere/Mediastudio, this because this are program's which are standard delivered with the card
quote:Originally posted by Ford Prefect:
Hi Folks,
A friend of mine recently approached me because he has been having problems with Fast DV.now which he is using with Pinnacle Studio. He can capture and edit but so far has never been able to output back to his cam. I suggested that if the DV.now card is OHCI compliant then he should be able to load the std MS drivers, 1394bus.sys and MSDV.sys and that should work with Pinnacle Studio.
However, he gets the same problem, capture and edit OK, but output to cam is a no no!
What actually happens is that the camcorder starts (so control is working), the cam goes into "record mode" but no data is sent to it so only a blank screen is recorded???
So. Is this card OHCI compliant?
Is anybody using one with standard MS drivers?
Has anybody got one working with Pinnacle Studio??
Any suggestions or help would be appreciated.
Regards.