Mike request

6 replies [Last post]
H and M Video
Offline
Joined: Jun 5 1999
Any suggestions recommending a "small" mike suitable for a Sony Z1E and an EX3.  Low cost would be appreciated.
 
Harry

PC Specialist 3Gz Dual Core, Premiere CS3, Encore CS3, After Effects CS3, Matrox RT.X2, Panasonic HD HS-300, Z1E & PMW-EX3 Cams.
 
Now with a PC Specialist Quad Core i7-3770, 16GB RAM, 180GB SSD, GeForce GTX560 Ti Graphics Card, Blu-Ray & DVD R/W Burners and can't wait to set it up. Now up and running.  What a difference in Blu-Ray footage.

Dugi
Dugi's picture
Offline
Joined: Jul 2 2009
Re: Mike request
I have a TRAM which is quite small but it's a lapel mic.
MAGLINK
Offline
Joined: Mar 8 2007
Re: Mike request
H and M Video
Offline
Joined: Jun 5 1999
Re: Mike request
Thanks for the info.  Dugi, I have a couple of lapel mikes but the link from Gary looks interesting as this is thetype I would like.  A mike for general purposes.
 
Harry

PC Specialist 3Gz Dual Core, Premiere CS3, Encore CS3, After Effects CS3, Matrox RT.X2, Panasonic HD HS-300, Z1E & PMW-EX3 Cams.
 
Now with a PC Specialist Quad Core i7-3770, 16GB RAM, 180GB SSD, GeForce GTX560 Ti Graphics Card, Blu-Ray & DVD R/W Burners and can't wait to set it up. Now up and running.  What a difference in Blu-Ray footage.

paulears
paulears's picture
Offline
Joined: Jul 8 2008
Re: Mike request
Probably not what you want, but have a look at this mic.
It's very light - and you can change the capsules. I don't normally post links to my own stuff, but if you have phantom available - these are really useful. People usually buy them in pairs for stereo recording, but it's very handy being able to pick the right pickup pattern.
Paul
 
MattDavis
MattDavis's picture
Offline
Joined: Jul 1 2005
Re: Mike request
Sanken CS-1 short shotgun in a Rycote J-thingy has been a reliable companion since my first Z1 days.
 
 
And the funny little Rycote thing may be hard to find, so there's the J-Rod that will fit in the EX1's mic holder and provide mounting points for more traditional (less breakable) mic mounts.

Matt Davis - Director/Editor - Write, shoot, edit, publish - website & Blog
2x EX1R, FS100 & FS700 into FCPX & CS6

steve5
Offline
Joined: May 20 2006
Re: Mike request
Well spotted Gary just ordered one of those mic,s .
Steve