power calibration error

I am getting the following message when trying to copy a dvd using nero:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.2
Internal Version: 7, 10, 1, 2
(Nero Express)
Recorder: Version: TS01 - HA 1 TA 1 - 7.10.1.2
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: 6L14 - HA 1 TA 0 - 7.10.1.2
Adapter driver: HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD C LH52C1P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162D atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD800JD-75MSA3 10.0 viamraid Port 2 ID 0 DMA: Off
DiskPeripheral : ExcelStor Technology P22O viamraid Port 2 ID 2 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVD C LH52C1P D: CdRom0
TSSTcorp CD/DVDW SH-W162D E: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047792kB)
Free physical memory: 590MB (604472kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.9.2008
DVD-Copy on the fly
5:59:07 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5:59:08 PM #2 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5:59:08 PM #3 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

5:59:10 PM #4 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 2263904 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

5:59:11 PM #5 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 2263904 = 2263904, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

5:59:11 PM #6 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

5:59:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2263903 (503:05.28, 4421MB)

5:59:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

5:59:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CD/DVDW SH-W162D, Media type: DVD-R
Disc Manufacturer: DAXON0 - 16S
Disc Application Code: 64, Disc Physical Code: 193

5:59:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:59:11 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2263904 (2263904) = #2263904/503:5.29
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263904 blocks [E: TSSTcorp CD/DVDW SH-W162D]
--------------------------------------------------------------

5:59:11 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp CD/DVDW SH-W162D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4636475392, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2263904 | 2263904 | 0x00
2263904 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

5:59:11 PM #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

5:59:11 PM #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)

5:59:11 PM #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 16x (22,160 KB/s)

5:59:11 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:59:12 PM #17 Text 0 File DVDR.cpp, Line 3229
Recording mode: Sequential Recording Mode

5:59:12 PM #18 Text 0 File DVDR.cpp, Line 3385
Start write address at LBA 0
DVD high compatibility mode: Yes

5:59:12 PM #19 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:59:12 PM #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

6:04:19 PM #21 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x07d40040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

6:04:19 PM #22 CDR -1106 File Writer.cpp, Line 303
Power calibration error
E: TSSTcorp CD/DVDW SH-W162D

6:04:20 PM #23 Text 0 File DVDR.cpp, Line 3787
EndDAO: Last written address was -1 (FFFFFFFFh)

6:04:20 PM #24 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 16x (22,160 KB/s)

6:04:27 PM #25 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:05:19 PM #26 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:05:19 PM #27 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

6:05:20 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:05:23 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

6:05:23 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)